How to Control Your remote PC without using software

You can easily Control Your remote Desktop without using any

 software.  

Requirement :-

1. Two PC 

2. LAN Cable

 
Just follow those steps:-

Step-1: Connect both PC using LAN Cable.

Step-2: run (Win+r) and Type ncpa.cpl  and Press Enter button.

Step-3: Local Area Connection OR Ethernet (Right click on mouse 
and select properties) 

Step-4: Then Double click on internet protocol version 
4(TCP/ipv4) 

Step-5: Now change your own PC IP Address like this.

Step-6: Now change your Remote PC IP Address like this.

  

Step-7: Now test you LAN  Just run (Win+r) and Type cmd and Press Enter button.

Step-8: Now type ping 192.168.1.2 -t  and Press Enter button.

Step-9: If it show like this- "Riply From 192.168.1.2 : bytes=32 time<1ms TTL=64"

Step-10: It means LAN Connection Successful.

Step-11: Now open My Computer Properties and Click Remote tab.

 

Step-12: Select Allow Remote Assistance Connections to the Computer and click Apply and click OK. (Apply this step both PC) 
 

 
 Step-13: Now run (Win+r) and Type mstsc and Press Enter button.

 
Step-14: Now Select your Remote Desktop PC name or IP Address and Click Connect.

Step-15: It will show your remote desktop PC Windows.


In This way you can easily control your remote desktop pc.


Note:- When you connect your remote PC, Remote PC will log-off.

• Tweet
• Share
• Share
• Share
• Share